The Antminer T9 Bitcoin Miner follows the same form factor as that of the hugely popular Antminer S9 and is also the same size.The T9 employs the same 16nm ASIC chip as the Antminer S9 and can deliver a hashrate of 11.5TH/s with an efficiency of 0.126J/GH (+7%).
The major selling point of the T9 is improved reliability. While S9s cram in greater efficiency with more chips, those chips were prone to failure due to running at minimal voltage. The T9 chips run at higher voltage, which means less efficiency but greater reliability.
1. Hash Rate: 11.5TH/s ±5%
2. Power Consumption: 1450W + 7% (at the wall, with APW3)
3. Power Efficiency: 0.126 J/GH + 7%(at the wall, with APW3 93%)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 189x BM1387
6. Dimensions: 350mm(L)*135mm(W)*158mm(H)
7. Cooling: 2x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 650M
Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!
Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10x PCIE connectors are connected to power supply.
Power supply unit is not included, buy the APW3++ Power Supply. The power cord is also not included, please find one with at least 10A from your local market.
Read more about the: Antminer T9 Bitcoin Miner.